The rear axle assembly
List the rear axle assembly
-
The vr6 had suspension components from the a3 model range, including the rear axle assembly and some parts of the a3's front axle assembly...the side plastic molding and rear slc emblem was removed...
$ 249005085570152
-
In order to keep the overall vehicle height low, the rear axle was underslung, the chassis frame passing under the rear axle assembly...features on this open two-seater vehicle: cc 4-cylinder engine,...
$ 59900
-
This is a rolling chassis/ body the only items left on this car are the front clip and the rear axle assembly so that the car can be moved around easily...currently used to store some allante trim parts...
$ 1100
-
I lengthened it just over the rear axle hump to accommodate the willys' factory wheelbase...the rear axle is a pre- gm 14-bolt with g gears,a detroit locker, and an ord disc brake conversion...
$ 5000
-
With 3" pipes which dump in front of the rear axle...rear end- brand new moser ford 9" in 3... 17x7" front w/ s and 18x 9" rear w/ s... brand new "ruby red" pontiac v side markers & bezels in the rear...
$ 45968
-
The chassis had an 80-inch wheelbase using half-elliptic springs with a beam axle in front and quarter-elliptic springs in the rear...under the hood is a cast-iron block assembly (ciba) engine, a 724cc...
$ 18900
-
Canvas check straps are still fitted to the rear axle and they made an effort to reproduce factory assembly markings, including a stencil on the driveshaft to mimic the original...harwood motors ltd...
$ 15100
-
The chassis had an 80-inchwheelbaseusing half-elliptic springs with a beamaxlein front and quarter-elliptic springs in the rear...under the hood is a cast-iron block assembly (ciba) engine, a 724cc overhead-cam...
-
The rear suspension differed from the car...the rear suspension did not have shocks...the aa had leaf springs mounted to the chassis and shackled to the rear axle...the brakes are proportioned more toward...
-
The rear axle is a chevrolet chevelle 12 bolt with 4...33 to 1 rear axle gears! very few of these cars still exist and they rarely change hands... 1/4 panel and the drivers side rear 1/4 had a nicely done...
$ 9500
-
The rear suspension did not have shocks...the aa had leaf springs mounted to the chassis and shackled to the rear axle...the brakes are proportioned more toward the rear drums...louis, missouri...