Approximately 28 inches
List approximately 28 inches
-
While most other vehicles focused on downsizing, the second-generation bronco added 12 inches of wheelbase, approximately 28 inches of length, 11 inches of width, and four inches of height; based on powertrain...
-
approximately 14" x 5 1/2"...the frame is 32 inches wide...this truck has a 5-inch channel frame, and a rectangular rear axle that is approximately 2 inches by 3 inches...the inner wheels (front and rear)...
$ 20000
-
4 inches wheelbase: inches curb weight: lbs...9 inches height: 52...length: inches width: 76...9 inches front leg room: 42...4 inches luggage capacity: 11 cu...4 inches rear head room: 35...
$ 47968
-
I have a texas title for this vehicle in my name...please scroll to the bottom of this page and allow time for the more than 80 high-resolution photos to load in your browser...this car has not been scavenged...
$ 3550
-
From the front of the zf 5 ds 25 (dash 2) transaxle it is approximately 35 inches without the bell housing and approximately 30 inches from the front of the bell housing to the bulkhead/firewall crossbar...
$ 22000
-
3 inches and use smaller and lighter anti-roll bars...as we bomb over a bridge deck that is set two inches above the road that abuts it, i tense in anticipation of a jarring impact--it never materializes...
$ 52500
-
(lbs): 125 lbs (57kg) overall size(inch): 63 x 28 x 41 inches ( x 700 x mm) carton size(inch): 54 x 14 x 31 inches ( x 360 x 780 mm) seat height: 28 inches (710 mm) ground clearance: inches (290 mm)...
$ 850
-
Structurally, the unit is made with 9 inch formed channel long sills from 7 gauge material with interlaced 4 inch cross-members spaced approximately 14 inches apart...when special finance rate become available...
$ 64816
-
Scott soon began a restoration on the low-mileage, solid southern car that spanned approximately five years...not to be outdone by a buddy who hauled his boat with his plymouth gtx, jack assigned the...
$ 66900
-
Structurally, the unit is made with 9 inch formed channel long sills from 7 gauge material with interlaced 4 inch cross-members spaced approximately 14 inches apart...air cleaner-donaldson, wabco exhaust...
$ 62111
-
The floor is lowered approximately 8 inches, and combined with kneeling, results in an entrance height from the ground of only 6 inches...things that i know need work / addressing...
$ 3000
-
The steel body was chopped approximately 4 inches all around which was monumental task by itself...5 inches from the top, blocked and lowered tan over charcoal exterior with gray stripe at beltline; burgundy...